3 Series E36 318tds (M41) SAL
VK-23/Kiehne
Baugruppe/Group: 34
34 01 96 (053)
weltweit
all countries
03/1996
ABS telltale light glows
E36
Situation:
Due to a hardware fault in the ABS control unit, the ABS telltale light may glow after other
electrical equipment has been switched on. No fault is stored in the ABS control unit fault
memory. The ABS is in full working order !
Affected
vehicles:
Only in very rare instances does this problem arise !
E36 - all models without ASC
Period of manufacture: 02.01.1996 - 09.02.1996
Procedure:
In the event of this complaint arising, the ABS control unit should be replaced (please refer
to Repair Instructions).
Parts:
ABS control unit for all models: part no. 34 52 1 163 089.
The Central Parts Warehouse in Dingolfing has been cleared of old stock.
Reimbursement:
Material and labour costs incurred can be claimed through the usual warranty channels
subject to current warranty terms as follows:
Defect code
34 52 92 87 00
This Defect Code is not contained in the official
Defect Code Catalogue but has been included in
the system, enabling warranty claims to be
processed.
Call up fault memory with the Diagnostic System
Job number
00 00 005
Labour
3 FRUs
Renewal of control unit (ABS)
Job number
34 52 510
Labour
4 FRUs
Warranty type
1
Warranty stage
1
The deadline for submitting claims is 31.12.1996 .
SI ABS telltale light glows E36
BMW AG - TIS
06.02.2013 19:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -