3 Series E36 318tds (M41) SAL
Unscrew and remove splash guard.
Oil oil drain plug or drain off oil.
Installation note:
Replace sealing ring.
Tightening torque,
refer to Technical Data 11 13 1AZ
Top up engine oil.
Switch on engine and run at idle until oil indicator lamp goes out.
Stop engine and check oil level.
Note:
Park vehicle on level ground.
RA BMW engine oil service (M41)
BMW AG - TIS
06.02.2013 20:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
