3 Series E36 318tds (M41) SAL
Fit sprocket and chain.
Fit screw with no clearance.
Fit special tool 11 3 360 to chain tensioning rail and press in
chain tensioner.
Remove special tool 11 3 340 and slowly relieve load on chain
tensioner.
Tighten down camshaft gear.
Tightening torque,
refer to Technical Data 11 31 4AZ
RA Removing and installing cylinder head (M41)
BMW AG - TIS
06.02.2013 20:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -