3 Series E36 318tds (M41) SAL
Caution!
Valves with incorrect valve-plate thickness will cause engine
damage.
Valves must not show signs of grinding wear.
Measure valve-inset clearance "R":
Fit dial gauge with measuring fixture 00 2 530 to cleaned cylinder-
head sealing face and adjust to zero under initial stress.
Fit dial gauge to valve plate and measure valve-inset clearance R,
refer to Technical Data
RA Rework one valve seat (M41)
BMW AG - TIS
06.02.2013 20:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
