3 Series E36 318tds (M41) SAL
11 13 000
Removing and installing, sealing or replacing
oil pan (M41)
Note:
For removal of oil pan, front axle support must be lowered.
There is no need to perform a front axle alignment check.
Removing intake filter housing,
refer to 13 71 000
Remove cover for intake line.
Loosen guide pipe for dipstick.
Installation:
Check O-ring, replacing if necessary.
RA Removing and installing, sealing or replacing oil pan (M41)
BMW AG - TIS
06.02.2013 20:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
