3 Series E36 318tds (M41) SAL
11 14 110
Removing and installing, sealing/replacing
timing case cover at bottom (M41)
Remove oil sump,
refer to 11 13 000.
Note:
After removing oil sump, temporarily reinstall front axle
support and remove special tool 00 0 200.
Remove cylinder head,
refer to 11 12 100.
Unfastening support bracket.
Unfastening coolant connecting line.
Installation:
Replace O-ring.
Remove drive belt tensioner,
refer to 11 28 020.
If necessary, unfasten bearing pin on timing case cover with
special tool 11 2 360.
Tightening torque,
refer to Technical Data 11 14 3AZ.
RA Removing and installing, sealing/replacing timing case cover at bottom (M41)
BMW AG - TIS
06.02.2013 20:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -