3 Series E36 318tds (M41) SAL
11 21 500
Replacing crankshaft (M41)
(engine removed)
Removing oil pump,
refer to 11 41 000
Removing end cover from back: this operation is described in
section on replacing radial seal in crankshaft,
refer to 11 14 151
Removing all pistons,
refer to 11 25 530
If the permitted end float is exceeded, check crankshaft and guide
bearing shells, replacing if necessary,
refer to 11 21 531
End float,
refer to Technical Data
Unfasten screw connection on main bearing.
Remove main bearing cover 1...5.
Lever out crankshaft.
RA Replacing crankshaft (M41)
BMW AG - TIS
06.02.2013 20:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
