3 Series E36 318tds (M41) SAL
11 23 031
Replacing vibration damper hub (M41)
Removing vibration damper,
refer to11 23 010
Secure special tool 11 2 150 to hub.
Caution!
Remember to fit dowel pin.
Protect engine mount from damage.
Insert wood between engine carrier and special
tool 11 2 150.
Unfasten central screw, remove washer with hub.
Note:
Using air conditioning compressor, insert spacer (special
tool 11 2 410).
Replace crankshaft radial sealing ring,
refer to 11 14 151
RA Replacing vibration damper hub (M41)
BMW AG - TIS
06.02.2013 20:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
