3 Series E36 318tds (M41) SAL
11 31 052
Replacing both timing chains (M41)
(for injection pump and camshaft drive)
Remove gear case cover, bottom,
refer to 11 14 110
Removal:
Removal of both timing chains is described separately from
installation. Assembly sequence for removal differs from
installation sequence.
Press clamping piston down and secure with plug pin - Special
Tool 11 3 340.
Caution!
Tensioner pistons are under spring pressure.
When plug pins are removed, there is a risk of injury.
RA Replacing both timing chains (M41)
BMW AG - TIS
06.02.2013 20:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
