3 Series E36 318tds (M41) SAL
Installation:
Coat contact faces of hydraulic-valve compensators and
install in correct sequence, arranged by cylinder.
Note:
Used hydraulic-valve compensators may only be reinstalled in
bore from which they were removed.
Caution!
Do not damage contact faces of hydraulic-valve
compensators.
Install special tool 11 0 200 (protective foil).
Insert special tool 11 3 132 from below in special tool
11 1 065 and secure with special tool 11 1 045.
Align special tool 11 0 194 in direction of valve shaft and select
appropriate groove in special tool 11 0 342.
RA Replacing all valve springs (M41)
BMW AG - TIS
06.02.2013 20:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
