3 Series E36 318tds (M41) SAL
Installation:
Install oil pump and use special tools 11 4 201 and
11 4 202 to center pump in relation to crankshaft. Screw
special tool 11 4 203 firmly down, then install screws for oil
pump and tighten down.
If necessary, dismantle oil pump and reassemble.
Unscrew intake fitting.
Caution!
The intake snorkel is secured with self-tapping screws.
For this reason, there is no thread on new pump housings.
Thread can be shaped using existing screws.
Installation:
Replace seal.
Unfasten screws and lift off cover.
RA Installing and removing or replacing oil sump (M41)
BMW AG - TIS
06.02.2013 20:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
