3 Series E36 318tds (M41) SAL
13 62 511
Replacing temperature sensor for intake air
(M41)
Read fault memory. Switch off ignition.
Removing intake air manifold,
refer to 11 61 050
Disconnect connector.
Depress interlock and remove temperature sensor.
Installation note:
Read error memory on DDE control unit, check faults in
memory, rectify faults then clear the error memory.
RA Replacing temperature sensor for intake air (M41)
BMW AG - TIS
06.02.2013 21:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
