3 Series E36 318tds (M41) SAL
13 62 520
Removing and installing or replacing
accelerator sensor (M51, M41)
Read error memory. Switch off ignition.
Disconnecting battery ground/positive terminals. Note
General Data on disconnecting/connecting battery,
refer to General Data HG-12
Remove lower steering column casing.
Pull connector holder off steering column
and push it to one side.
Disconnect connector.
Disconnect linkage at accelerator pedal.
Pull spring washer (1) off making sure that bush (2) does not slide
out of the accelerator pedal (3).
RA Removing and installing or replacing accelerator sensor (M51, M41)
BMW AG - TIS
06.02.2013 21:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
