3 Series E36 318tds (M41) SAL
Installation:
The marker rib on the fuel level sensor must match the mark
on the fuel tank.
Caution!
Fuel return hose and tank expansion line are pressed with
preload to base of fuel tank.
Swing-arm and float must still move easily.
Installation:
Swivel air valve and float into fuel tank.
Press fuel level sensor vertically into correct position with
height sensor perceptibly in contact with base of fuel tank.
RA Removing and installing / replacing fuel level sensor (left) (complete unit)
BMW AG - TIS
06.02.2013 21:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
