3 Series E36 318tds (M41) SAL
Alignment of the flanged joint.
Note:
Sealing taper is produced by upset pipe.
Installation:
Lubricate flanged joint lightly with copper paste -CRC-, refer to
BMW Parts Service.
Turn flanges until maximum possible ground clearance is
provided.
Align the flanges parallel to each other.
Insert screws.
M41
Loosen the clamp on the exhaust bracket.
Installation:
Insert screws.
M51
Loosen the clamp on the exhaust bracket.
RA Removing and installing / replacing exhaust-catalytic converter (M41, M51)
BMW AG - TIS
06.02.2013 22:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -