3 Series E36 318tds (M41) SAL
23 23 508
Dismantling and assembling all synchronizer
units (S5D 200G/ E36 M41)
Transmission removed.
Completely remove and install input and output shafts,
refer to 23 21 505.
Remove selector rods (1) from gear train.
Remove countershaft from input and output shafts.
Dismantling input and output shafts:
Place complete input shaft (1) and output shaft (2) on special tool
23 2 190.
Remove input shaft (1) from the output shaft.
RA Dismantling and assembling all synchronizer units (S5D 200G/ E36 M41)
BMW AG - TIS
06.02.2013 22:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
