3 Series E36 318tds (M41) SAL
Assemble countershaft:
Note:
Coat needle bearing and synchronizer ring on bearing
surfaces with ATF-oil.
Fit needle bearing (1), 3rd gear (3) and synchronizer ring (2) to the
countershaft.
Caution!
When press-fitting the guide sleeve, ensure that the detent
lugs (1) on the synchronizer ring locate in the guide sleeve
recess.
Heat guide sleeve for 3rd/4th gears to approx. 120
°
C (hot air
blower), fit on countershaft and press firmly home with special tool
23 1 290.
Heat inner bearing race (1) to approx. 80
°
C (hot air blower) and
push onto layshaft until limit stop.
Place one pressure piece (1) with a spring (2) in each recess in
the guide sleeve.
Note:
Tapers on the pressure piece point outwards.
RA Dismantling and assembling all synchronizer units (S5D 200G/ E36 M41)
BMW AG - TIS
06.02.2013 22:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -