3 Series E36 318tds (M41) SAL
32 11 100
Replacing bellows for steering gear on left or
right
Caution!
Clean rack and steering tie rod.
Grease toothed area of rack,
refer to BMW Service Operating Fluids.
If polished surface of rack is damaged (rust), replace steering
gear.
With steering damper:
Unbend lockplate.
Caution!
Unbend lockplate with pliers (never with hammer) in order to
avoid damaging rack and bearing.
Insert rack as far as possible.
Unscrew tie rod using special tool 32 2 110.
Installation:
Replace lockplate.
Turning lock (1) must engage in groove (2) of damper holder.
Tightening torque,
refer to Technical Data 32 21 2AZ.
Bend lockplate with pliers.
Remove damper holder.
Loosen both clamping straps and remove sleeve.
Mount new sleeve with new clamping straps.
RA Replacing bellows for steering gear on left or right
BMW AG - TIS
06.02.2013 23:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
