3 Series E36 318tds (M41) SAL
Disconnect hose on tank.
Unscrew hollow union bolt.
Installation:
Replace sealing rings.
Install line with rubber grommet in bracket.
Tightening Torque,
refer to Technical Data 32 41 3AZ.
Remove bolt and separate universal joint from steering gear.
Installation:
Note position of steering spindle,
refer to 32 31 070.
Unscrew bolts and take off steering gear in forward direction.
Installation:
Replace self-locking nuts.
Tightening Torque,
refer to Technical Data 32 00 1AZ.
RA Removing and installing power-steering gear
BMW AG - TIS
06.02.2013 23:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
