3 Series E36 318tds (M41) SAL
Installation:
Replace lockplate (A or B); not steering gear manufactured by
TRW (Z3).
If lockplate (B) (with spacer to limit steering angle) is installed, new
lockplate must also be fitted with a spacer.
Turning lock (1) must engage in groove (2) of rack.
Tightening torque,
refer to Technical Data 32 21 2AZ.
Bend lockplate with pliers.
Replacing track rod end,
refer to 32 21 151.
RA Replacing left or right tie rod
BMW AG - TIS
06.02.2013 23:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -