3 Series E36 318tds (M41) SAL
32 31 ...
Disassembling and assembling complete
steering column
Removing steering column,
refer to 32 31 090.
Remove screws and pull off clip.
Pull lower section of steering-column casing off upper section.
Installation:
Check for correct position of lock.
Installation:
Guide both holders of upper section into bores.
Insert ignition-lock ring.
RA Disassembling and assembling complete steering column
BMW AG - TIS
06.02.2013 23:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
