3 Series E36 318tds (M41) SAL
Warning!
Passenger airbag may only be set down with impact pad
facing upwards (luggage compartment).
Note for Compact:
The way in which the airbag cover and the airbag module are
mounted has changed.
Airbag cover:
The airbag cover (3) is secured as before with the longitudinal
strap (4) by a retaining rail (1) to the support tube.
The transverse straps (5) are also attached to this retaining
rail (1).
The nuts (2) for mounting the airbag module to the support
tube are located on this retaining rail (1).
The airbag cover is no longer mounted to the instrument panel.
Airbag module:
On the airbag module, the retaining nuts for the screw connection
on the support tube are omitted.
The new airbag module is secured to the support tube with the
nuts (2) on the retaining rail (1).
1 = Retaining rail
2 = Nuts for securing airbag module
3 = Airbag cover
4 = Transverse straps
5 = Longitudinal strap
Instrument panel reinforcement, viewed from top side (cover side).
RA Additional work with passenger airbag
BMW AG - TIS
06.02.2013 23:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
