3 Series E36 318tds (M41) SAL
32 41 553
Dismantling and assembling vane pump (ZF
pump)
- Pump removed -
Absolute cleanliness is essential when working on power-
steering pump.
Remove pulley.
Mark bracket on pump housing.
Unscrew bolts and take off body.
Remove face plate (3).
Press rotor (4) on shaft (5) in downward direction.
Remove circlip (6) and pull shaft out of body.
Remove rotor (4).
RA Dismantling and assembling vane pump (ZF pump)
BMW AG - TIS
06.02.2013 23:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
