3 Series E36 318tds (M41) SAL
Installation:
Install old shim (X) in front of the rear bearing outer race.
Fit new outer bearing race with special tool 33 1 373 / 365
/ 362 / 363 / 354.
Installation:
Press new taper roller bearing inner races to the new drive
pinion with special tool 33 1 020.
Caution!
Drive pinions and crown wheels are paired for optimal smooth
running in special machines.
The pairing code (P) is embossed electrically on the drive pinion
and crown wheel.
Never install crown wheel and drive pinion with different pairing
codes (P) together.
H = Gleason hypoid teeth (helical shape).
The inscribed number with "+" or "-" is the deviation from basic
distance C in hundredths of millimeters and is required for
adjustment of the tooth contact pattern with shims.
+ e is added to C.
- e is subtracted from C.
RA Replacing drive pinion with crown wheel (Type K) - final drive removed -
BMW AG - TIS
07.02.2013 00:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
