3 Series E36 318tds (M41) SAL
Unscrew bolts on trailing arm console.
Installation:
Tightening torque,
refer to Technical Data 33 32 13AZ.
Note:
Damaged threads in bushes on body side can be repaired with
Helicoil thread inserts M 12 X 1.5 X 18. The Helicoil thread
inserts must be fitted flush with the original thread.
Take up rear axle special tool 00 2 030/00 2 040/33 3 290.
Unscrew rear axle carrier mounting bolts and nuts.
Installation:
Tightening torque,
refer to Technical Data 33 33 3AZ.
Note:
Damaged threads in bushes on body side can be repaired with
Helicoil thread inserts M 12 X 1.5 X 18. The Helicoil thread
inserts must be fitted flush with the original thread.
Lower transmission lifter slowly. Remove springs.
Installation:
Connect springs with rubber rings on body.
RA Removing and installing complete rear axle carrier
BMW AG - TIS
07.02.2013 00:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
