bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
6 RA Replacing One Front Trailing Arm Rubber Mount (trailing Arm Removed)|Page 1297 > < 6 RA Replacing One Front Trailing Arm Rubber Mount (trailing Arm Removed)

3 Series E36 318tds (M41) SAL

Page 2
background image

Rubber mount with collar:

Measure gap (A) with a feeler gauge and note value.

Rubber mount with collar:

Pull out rubber mount using special tool  00 8 550 /33 3 324 /
33 3 340 .

Rubber mount with collar:

Installation:

Installed position of rubber mount

Rubber mount with collar:

Rubber mount and trailing arm eye must be free of grease.

Draw in new rubber mount with special tool  33 3 222 /
33 3 223 /33 3 314  and M12 nut (1) to previously determined
gap (A).

RA  Replacing one front trailing arm rubber mount (trailing arm removed)

BMW AG - TIS

07.02.2013  00:16

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

6 RA Replacing One Front Trailing Arm Rubber Mount (trailing Arm Removed)|Page 1297 > < 6 RA Replacing One Front Trailing Arm Rubber Mount (trailing Arm Removed)