3 Series E36 318tds (M41) SAL
34 41 000
Removing and installing handbrake lever
Lift out dust cover.
Remove tunnel tray,
refer to Gr. 51
Loosen lock nut using special tool 34 1 030 and unscrew
together with adjusting nut.
Unscrew bolts.
Remove handbrake lever.
Note:
Be careful not to damage warning switch during removal and
installation.
Adjust switch,
refer to Gr. 61
Adjust handbrake,
refer to 34 10 014
RA Removing and installing handbrake lever
BMW AG - TIS
07.02.2013 00:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
