3 Series E36 318tds (M41) SAL
61 12 525
Replacing both rear impulse sensors for ABS
Note:
Remove rear wheel,
refer to Gr. 36
Open protective box for ABS sensor.
Procedures for rear-left sensor are analogous to those for rear-
right sensor.
Lift out plug-in connection.
Disconnect connector.
Unscrew hexagon screw.
Lift out sensor.
Installation:
Clean and lubricate dowel-pin bore with Staborax NBU 12/k
(refer to BMW Parts Service).
RA Replacing both rear impulse sensors for ABS
BMW AG - TIS
07.02.2013 01:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
