3 Series E36 318tds (M41) SAL
Produce upper reinforcement plate for B-pillar and fit in.
Coat reinforcement plate with zinc dust paint.
Drill holes for plug welding upper reinforcement plate.
Weld reinforcement plate.
Grind welding spots until smooth.
Drill holes for plug welding in side member cover and deburr.
Clean and coat mating surfaces for partial replacement of side
member cover with zinc dust paint.
Fit in and clamp down side member cover with B-pillar outer panel
and weld mating surfaces.
Weld B-pillar to reinforcement plates.
RA Replacing left or right side member cover (partial replacement of A-pillar and r
BMW AG - TIS
07.02.2013 01:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
