3 Series E36 318tds (M41) SAL
Cut off side member connection roughly.
Remove scrap metal. Straighten and clean mating surfaces.
Fit in trunk floor plate with staightening attachment and clamp.
Mark out holes for plug-welding.
Remove trunk floor.
Drill holes in new trunk floor plate for plug welding.
Coat mating surfaces on new part and on car with zinc dust paint.
RA Replacing complete trunk floor (tail panel removed)
BMW AG - TIS
07.02.2013 01:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
