3 Series E36 318tds (M41) SAL
Take off cap.
Remove retainer if necessary.
Position special tool 51 2 010.
Drive out pin upwards.
Installation:
Before installation
Position special tool 51 2 010.
Drive in pin and install retainer if necessary.
Unhinge door by moving upwards and placing it on a suitable
surface.
Caution!
Be careful not to damage the door, front wall and paint finish,
cover with drawing tape if necessary.
Pull plug out of A-column.
Unlock plug by pulling up clamp.
Disconnect connector.
RA Removing and installing left or right front door
BMW AG - TIS
07.02.2013 02:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
