3 Series E36 318tds (M41) SAL
41 62 000
Removing and installing trunk lid
Note:
Engine hood was fitted and screwed in an unfinished body
shell.
Unpainted surfaces become visible after subsequent
movement.
These surfaces must be touched up with paint in the body
color.
Wire harness on trunk lid does not have a point of connection.
Wire harness must be removed from trunk lid before removing the
trunk lid.
Disconnect gas pressure props.
Caution!
Gas pressure props have high resistance.
Loosen left and right screws (1).
Unscrew left and right screws (2).
Pull trunk lid backwards to remove.
RA Removing and installing trunk lid
BMW AG - TIS
07.02.2013 02:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
