3 Series E36 318tds (M41) SAL
51 24 004
Adjusting trunk lid lock (sedan, coupé and
convertible)
Requirement:
Trunk lid and gaskets must be correctly fitted and adjusted.
If necessary, adjust trunk lid to fit,
refer to 41 62 014
If necessary, lock ejectors in detent buffer:
Press ejector into detent buffer and, in this position, twist slightly to
left with a Phillips screwdriver.
Turn detent buffer on left/right of trunk lid to insert.
Check fulcrum pads on lower section of trunk lid lock for damage
and replace if necessary.
RA Adjusting trunk lid lock (sedan, coupé and convertible)
BMW AG - TIS
07.02.2013 02:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
