3 Series E36 318tds (M41) SAL
Cut off old cement in body opening to a thickness of
approx. 0.5 mm.
Cut off old cement carefully with an universal knife (sharp as a
razor blade) to avoid damaging the paint finish in body opening.
Pull off adhesive tapes all round.
Caution!
To provide long-term corrosion inhibition, damage to
paintwork (scratches and large areas of damage) should
always be touched up,
refer to 51 31 ...
When reusing the rear window:
Scrape away cement residue on rear window to depth of 0.5 mm
with scraper (Sourcing Reference: BMW Parts Service).
Mount and press seal on to rear window glass at bottom.
Mount and press seal on to rear window glass at top and sides.
RA Removing and installing rear window (sedan, coupé)
BMW AG - TIS
07.02.2013 02:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
