bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

45 Instrument Cluster Trim Panel > < 1 RA Removing And Installing _ Replacing Headlining (version With Slide_tilt Sun-roof|Page 1911
Page 3
background image

Pull off edge guards in back door openings partially.

Caution!

Do not bend the roof liner.

Move front seats forward as far as possible.

Fold down passenger-seat backrest.

Put driver seat backrest into upright position.

Hold roof liner tight and pull off edge guard.

Push back roof liner slightly and unhook rear end on roof flange.

1. 

 Outer skin on roof

2. 

Rear window

3. 

 Headliner

4. 

 Sheet metal web

Installation:

Make sure that rear end of roof liner is hooked onto roof
flange correctly.

sedan:

Twist roof liner and lift it out through the back door on the driver's
side.

coupé:

Twist off roof liner and lift it out through the door on the
passenger's side.

RA  Removing and installing / replacing headlining (version with slide/tilt sun-roof

BMW AG - TIS

07.02.2013  03:10

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 3 -

45 Instrument Cluster Trim Panel > < 1 RA Removing And Installing _ Replacing Headlining (version With Slide_tilt Sun-roof|Page 1911