bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing Or Replacing Left Or Right Front Entrance Cover Strip (4|Page 1929 > < 8 RA Removing And Installing_replacing Rear Window Roller Blind (with Through-loading
Page 1
background image

51 47 000

Removing and installing or replacing left or
right front entrance cover strip (4-door,
inside)

Disconnect cover strip from 1st clip.

Note:

Removal will be difficult. If necessary, pry out strip carefully
using a screwdriver.

Slide forward cover strip as far as possible until rear clips are
accessible.

Pull cover strip off towards rear.

RA  Removing and installing or replacing left or right front entrance cover strip (4

BMW AG - TIS

07.02.2013  03:16

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing Or Replacing Left Or Right Front Entrance Cover Strip (4|Page 1929 > < 8 RA Removing And Installing_replacing Rear Window Roller Blind (with Through-loading