3 Series E36 318tds (M41) SAL
51 49 000
Removing and installing or replacing trim for
trunk lid
Full trim panel:
Unfasten the clips, loosen screw (1) and remove the tool box.
Release clips and remove trim panel for trunk lid.
Partial trim panel:
Unclip trim panel (1).
Installation:
Lift off clips (1) and slide supports (2) into trim panel.
If necessary, replace defective clips (1).
RA Removing and installing or replacing trim for trunk lid
BMW AG - TIS
07.02.2013 03:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
