3 Series E36 318tds (M41) SAL
52 20 020
Removing and installing/replacing armrest on
rear-seat backrest (saloon/sedan)
Removing and installing armrest:
Remove armrest (1) towards rear/upwards (spring (2) is pressed)
from guide sleeve (3).
Removing and installing cup holder:
Open drawer.
Press cup holder (1) towards right (A) and lever out upwards
towards left (B).
Removing and installing drawer:
Note:
The special tool 00 9 321 (folding leg) is required twice.
To remove, use side (2) of special tool 00 9 321 (folding leg).
Note:
The drawer (1) has two stops (2) which contact the two stops
(4) in the armrest (3) when the drawer is pulled out; these
stops (2 and 4) must be removed for disassembly purposes.
RA Removing and installing/replacing armrest on rear-seat backrest (saloon/sedan)
BMW AG - TIS
07.02.2013 03:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
