3 Series E36 318tds (M41) SAL
61 35 ...
Operation of window regulator
The power-window switch has two switching stages in each operating direction.
The first stage is for normal power-window operation.
Operating and releasing the second stage immediately afterwards introduces automatic operation (tip function). The
power window is then activated so long until a relevant final position is reached or the motor blocked. The tip function
can be stopped by pressing the switch in any direction.
E 36 (Coupé): Power windows can only be operated when the comfort-relay terminal is activated!
Clamping protection is always activated in raising direction for both manual and automatic operation.
Continuous operation of the switch (second stage) is for emergency shutting without clamping protection.
In normal operation (first switch stage), the power window is activated so long as switch is operated and the power-
window motor is not blocked.
In the event of blocking, the motor will be switched off after a pre-programmed time, even if the switch is operated
longer.
RA Operation of window regulator
BMW AG - TIS
07.02.2013 04:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
