3 Series E36 318tds (M41) SAL
Installation:
When installing cable duct, make sure rubber grommets of cable
penetration are properly fitted.
Installation:
Observe tightening sequence of screws/nuts:
1.
At cowl panel (large nut)
Tightening torque, 61 61 5AZ .
2.
Support on wiper motor
Tightening torque, 61 61 9AZ .
3.
Support on wiper motor
Tightening torque, 61 61 8AZ .
RA Removing and installing complete mounting bracket for windshield wiper system wi
BMW AG - TIS
07.02.2013 04:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -