3 Series E36 318tds (M41) SAL
Press down on clips and take off both bulb covers.
Pull off earthing cable (1). Remove bulbs (2) and wires. Pull out
bulb holder (3) for parking light.
Rotate vertical aim adjuster approx. 45
°
and lever ball pin (2)
downwards out of bracket.
If elypsoidal headlights fitted:
Fully unscrew adjusting screws (4 and 5) for vertical and lateral
headlight adjustment. Remove reflector.
Installation:
Screw studs in reflector at approximately the same position.
RA Replacing reflector for left headlight
BMW AG - TIS
07.02.2013 05:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
