3 Series E36 318tds (M41) SAL
Loosen nut and place water flange to one side. Blow air into
delivery line to ensure that residual coolant from heater core does
not drip onto carpet.
Installation:
Tightening torque,
refer to Technical Data 64 21 3AZ
Replace O-rings.
Sedan, coupé, convertible
Unscrew studs.
Installation:
Tightening torque,
refer to Technical Data 64 21 2AZ.
Replace O-rings.
Compact
Unscrew bolts.
Installation:
Tightening torque,
refer to Technical Data 64 21 4AZ.
Replace O-rings.
Unscrew bolts.
RA Replacing heater core (heating)
BMW AG - TIS
07.02.2013 05:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
