bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Cleaning Evaporator|Page 2413 > < 11 RA Instructions For Opening And Replacing Parts In Refrigerant Circuit|Page 2410
Page 1
background image

64 51 000

Cleaning evaporator

Note:

It is possible for bacteria to build up on the evaporator
plates. This occurs due to the condensate that is left
behind on the plates after the compressor is switched off.
When the compressor is switched on again there could be
a moldy odor in the car for a short time. For this reason, the
evaporator should be cleaned at regular intervals.

Note:

Drive car to a washing bay or over a drain and performing
cleaning there, as water is discharged outdoors through drain
holes in the transmission tunnel.

Remove instrument panelling at bottom left.

Unscrew bolts.

RA  Cleaning evaporator

BMW AG - TIS

07.02.2013  05:48

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Cleaning Evaporator|Page 2413 > < 11 RA Instructions For Opening And Replacing Parts In Refrigerant Circuit|Page 2410