3 Series E36 318ti (M44) COMP
Press axle journal outwards to gain access to the wheel guide
joint.
Support steering knuckle in position, e.g. with brake support from
wheel alignment unit.
Withdraw wheel guide joint with special tools 31 1 441 /
31 1 443 / 31 1 445 / 31 1 446 .
Remove rust from lower face of control arm with scraper / wire
brush and clean the bore.
Screw special tool 31 1 448 onto new wheel guide joint as far as
it will go.
RA Replacing wheel guide joint in control arm
BMW AG - TIS
07.02.2013 00:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -