3 Series E36 318ti (M44) COMP
Note:
Check for uniform protrusion (B) of rubber mount.
Check rubber mounts - does not apply to M3:
Vehicle in normal position,
refer to Technical Data Gr. 32.
Measure gap (A) with a feeler gauge.
Specified value: A = 0.8
±
0.5 mm.
If measurement yields a deviation from nominal value - replace
rubber mount.
RA Replacing rubber mounts for control arm
BMW AG - TIS
07.02.2013 00:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
