3 Series E36 318ti (M44) COMP
Immerse shaft seal in final drive oil and drive in flush with special
tool 33 1 430 in conjunction with special tool 00 5 500.
Press-fit input flange to the input shaft using special tool
23 1 300 but do not tighten down.
The axial preload force of drive pinion bearings (5000 N) can be
determined with help of the friction torque.
Gradually tighten down input flange with collar nut, measuring
friction torque at regular intervals.
Measure friction torque with special tool 00 2 000 and suitable
socket adapter.
refer to Technical Data.
Caution!
The relation between friction torque and preload force differs
depending on the make of bearings.
Refer to pinion bearing table for specified friction torque, refer to
Technical Data, and add 20 Ncm for the new shaft seal.
RA Replacing bearing for drive pinion (Type K) - final drive removed -
BMW AG - TIS
07.02.2013 01:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
