3 Series E36 318ti (M44) COMP
35 41 010
Removing and installing or replacing
accelerator lever
Note:
Remove panelling for instrument panel,
see gr. 51
Disconnect Bowden cable on accelerator-lever shaft.
Installation:
Check rubber grommet, replacing if necessary.
Press off locking washer (1).
Disconnect pedal.
Installation:
Grease anti-friction faces,
refer to Technical Data
Take off locking clip.
Installation:
Check for correct seating of locking clip.
RA Removing and installing or replacing accelerator lever
BMW AG - TIS
07.02.2013 02:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
