3 Series E36 318ti (M44) COMP
64 11 208
Replacing heater core (air conditioner
compact)
Remove air collector,
refer to 64 11 207
For description of previous work,
refer to 64 11 207
Removing heater controls,
refer to 64 11 750
Removing shelf,
refer to 51 16 200
Loosen nut and place water flange to one side. Carefully blow air
into the feed lines to prevent residual cooling water in heater core
does not drip onto carpet.
Tightening torque refer to Technical Data 64 21 3AZ
Unscrew studs.
Installation note:
Replace -rings.
For tightening torque refer to Technical Data 64 21 2AZ
Loosen screw and take off tube with three-way flange.
Installation note:
Replace -rings.
For tightening torque refer to Technical Data 64 21 1AZ
RA Replacing heater core (air conditioner compact)
BMW AG - TIS
07.02.2013 06:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -