3 Series E36 318ti (M44) COMP
2-door models:
Remove cap (1).
Unscrew bolt (2) and remove belt from rod (3).
Installation:
Install bush (4).
Tightening Torque,
refer to Technical Data 72 11 1AZ
Take off cap.
Unscrew nut.
Remove B-pillar panelling, refer to Group 51
Installation:
Tightening Torque,
refer to Technical Data 72 11 6AZ
Unscrew bracket.
Unscrew automatic reel.
Installation:
Tightening Torque,
refer to Technical Data 72 11 1AZ
RA Removing and installing/replacing front seat belt
BMW AG - TIS
07.02.2013 07:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
