Removing Brake Shoes for 318ti (M44): Follow Repair Instructions
Remove brake cable (1) from mounting (2).
Unhook pressure spring (1) from fixed brake shoe (2) and brake
carrier (3).
Remove tension spring (1) from both brake shoe fixtures (2).
Remove brake lever assembly (3).
Installation:
The fixed part of the brake lever assembly (3) is seated on the
moving brake shoe. The moving part of the brake lever
assembly is seated on the fixed brake shoe.
Pull brake shoes (1) apart in direction of arrow, tilt forward and
remove from adjustment device (2).
Installation:
Always replace the four shoes and use the same make.
Minimum lining thickness: 1.5 mm
RA Removing brake shoes
BMW AG - TIS
07.02.2013 08:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
